Our readers keep the lights on and the coffee maker working hard! As an Amazon Associate, I earn from qualifying purchases.
Specs are compiled from manufacturer listings and verified buyer reviews and can change over time — please confirm the key details on the product page before buying.
Drilling into brick feels like a gamble until you understand one thing: a standard twist bit will skate across the surface, while a carbide-tipped masonry bit bites in and cuts straight. The right set means clean anchor holes instead of chipped brick and patching work. This guide breaks down the best Drill Bits for Brick by what actually matters on the job—tip material, shank type, and the sizes you will reach for again and again.
I’m Mohammad Maruf — the founder and writer behind Gardening Beyond. This guide is built by comparing the manufacturers’ published specifications and the patterns across verified customer reviews, so you get each pick’s real strengths and trade-offs instead of marketing spin.
We compared specs and owner reviews to find carbide-tipped sets that stay sharp through brick, block, and concrete.
Our Picks at a Glance
How To Choose The Right Drill Bits for Brick
Brick’s abrasiveness destroys cheap steel bits in seconds. First, choose tungsten carbide tips—they stay sharp grinding through mortar and clay. Second, match the shank type to your drill’s chuck—round, hex, or SDS-Plus.
Carbide Tip Geometry
Look at the cutting head. A cross-tip design with four contact edges spreads the load and starts a hole without wandering. A spear or taper point is better for tile and glass, but a cross tip grips brick so the bit does not skate across the face.
Shank Type: Hex vs Round vs SDS-Plus
A 1/4-inch hex shank locks into an impact driver or quick-change chuck, which is handy for small anchors. A round shank fits a standard three-jaw drill chuck, and it often has flats milled in so it won’t slip under load. SDS-Plus is a different system entirely—those bits only fit SDS-Plus rotary hammers, not a regular drill.
Flute Design and Dust Removal
Spiral flutes are the grooves that carry pulverized brick dust out of the hole. More flutes—four instead of two—mean faster debris removal, so the bit keeps cutting instead of binding. For deep holes, a bit with efficient dust-clearing flutes saves significant time.
Quick Comparison
| Model | Best For | Tip Material | Shank Type | Set Size | Amazon |
|---|---|---|---|---|---|
| DEWALT 7-Piece (DW5207)★ Best Overall | All-around masonry in hammer drills | Carbide | Round | 7 pieces | Amazon |
| Makita 5-Piece SDS-PlusPro Grade | SDS-Plus rotary hammer owners | Carbide | SDS-Plus | 5 pieces | Amazon |
| WildBossy 10-PiecePremium Pick | Hex-shank impact drivers on brick | Tungsten Steel Carbide | Hex | 10 pieces | Amazon |
| toolant 10-Piece 3/16″ | Commercial volume at one size | Carbide | Hex | 10 pieces | Amazon |
| DYRECELVE 12-Piece | Mortar and brick with quick-change chucks | YG6X Tungsten Carbide | Hex | 12 pieces | Amazon |
| FEWELL 10-Piece | Budget multi-material drilling | Industrial-grade alloy | Hex | 10 pieces | Amazon |
| TITGGI 12-Piece | Wide size range for DIY variety | YG6X Hard Alloy | Hex | 12 pieces | Amazon |
| BGTEC 10-Piece | Tile and brick with a guide point | YG6X Cemented Carbide | Round | 10 pieces | Amazon |
| BOSCH 5-Piece (LBH0025) | Precise starts in block and concrete | Diamond-grind Carbide | Round | 5 pieces | Amazon |
In‑Depth Reviews
1. DEWALT Masonry Drill Bit Set, 7-Piece (DW5207)
Our pick — over 4.5★ from 8,500+ verified ratings; the strongest balance of quality and price.
The crowd favorite that makes tough concrete block feel like soft wood in a hammer drill.
Buyers report this set “made quick work drilling through a tough concrete block,” which sums up why it holds the top spot. The secret is the four-flute design—the grooves that pull debris out of the hole—so the bit keeps cutting fast instead of clogging. This matters when drilling multiple holes with a hammer drill.
The 2-cutter carbide tip boost the carbide surface touching the brick, which translates to a longer working life per bit. A 135-degree cutting angle gives you a sharp, aggressive bite that starts true on the brick face. You also get three flats milled into the shank—the part that locks in the chuck—so the bit won’t spin and slip mid-hole.
Weighing 8.8 ounces for the whole 7-piece set, it’s lighter than the DYRECELVE 12-piece at 9.8 ounces, yet it carries the proven DEWALT build. The quality is the thing the review pages rave about most, and the bits fit standard hammer drill chucks. For reliable performance on brick, concrete, and block, this set delivers.
What wins people over
- Four-flute body clears brick dust for fast drilling
- Flats on the shank stop chuck slippage
- Trusted 135-degree carbide tip starts clean
Who should look elsewhere
- 7 pieces means fewer size options than 12-piece sets
- Round shank won’t fit SDS-Plus rotary hammers
Reach for this if: you want a proven, quality set for hammer drills on brick, block, and concrete.
skip it if: you need a huge range of sizes for vastly different anchor jobs.
2. Makita 5-Piece SDS-Plus Drill Bit Set
The aggressive SDS-Plus specialist that chews through old brick and foundation cement alike.
Unlike every other round or hex-shank bit on this list, the Makita set is built for SDS-Plus rotary hammers—the chunky tools with the sliding chuck. Owners say it cuts through foundation cement “like wood” and performs particularly well on old bricks. The hardened tungsten carbide tips resist wear, which is why the durability gets such consistent praise.
You can drill deep anchor holes because this set includes five bits sized 3/16″, 1/4″, 5/16″, 3/8″, and 1/2″, each 6-1/4″ long. The flute design (the spiral grooves that pull debris out) clears dust fast, so holes stay smooth and vibration stays low even in dense brick. At 11.36 ounces, it is the heaviest set here—that weight comes from the carbide-tipped build, which resists wear.
The catch is compatibility. It only fits SDS-Plus chucks with at least a 7/8″ size and 4″ drilling depth. A common mistake is buying these for a standard keyed chuck—they will not work and can look like a “disaster waiting to happen,” as owners mention. If you own an SDS-Plus hammer, this is a professional-grade step up; if not, skip it.
Built for the right tool: the standout speed and durability only open up inside an SDS-Plus rotary hammer, not a standard drill.
The honest limit: five bits is a slim range, and the SDS-Plus shank rules out regular chucks entirely.
3. WildBossy Concrete Carbide Drill Bit Set, 10-Piece
The hex-shank set that bored into a brick home “like butter” for a patio hose reel install.
This 10-piece set comes with sizes from 4mm up to 12mm, including three 6mm and two each of 5mm and 4mm bits—a spread that covers most household anchors. The NF10X tungsten steel carbide tip is the standout, and customers note immediate grab with no wandering or chipping on brick. That clean penetration is exactly what you want when drilling into a finished wall.
The shock-resistant hex-shank design locks securely into impact drivers, and the twist-flute body clears dust as you go. Owners rate the quality and functionality highly, noting the bits stay in good condition after repeated use. The clear storage case is a recurring point of praise because it keeps all ten sizes sorted.
It is a great fit if you work from an impact driver or quick-change chuck rather than a standard drill. Just note the durability is mixed in the reviews—while many report great longevity, a few hit tips breaking quickly. For straightforward brick and block jobs with the right tool, this is a strong performer.
A hex-shank workhorse: the NF10X tips grab brick immediately, and the size variety plus storage case make it a tidy kit.
The trade-off: it is meant for impact drivers, not SDS-Plus rotary hammers, and tip life varies by user.
4. toolant 3/16″ Concrete Drill Bit Set, 10-Piece
Ten identical 3/16-inch bits built for the brutal jobs you’d rather not use a favorite bit on.
Reviewers point out drilling 93 holes through an 1850s NYC stone basement with this set, which tells you the YG8X tungsten carbide tips have real staying power. This is a commercial-minded buy: all ten bits are the same 3/16-inch size, so you get a deep bench of spares for concrete, cinder block, brick, glass, and cement. The shockproof hex-shank structure provides stability in hammer mode.
The sharpened side edges boost carbide surface contact for faster drilling, and at 118 degrees the cutting angle is a standard aggressive profile. At 0.19 inches cutting diameter, these are much narrower than the FEWELL set’s 0.5-inch max—a 2.6x difference in the holes you can open. That makes this kit ideal for pilot holes and smaller anchors, not big through-holes.
The value case is simple: owners say they don’t last forever “but neither do the expensive name brand ones,” so buying ten at once means always having a sharp bit on hand. The durability is mixed in reviews, but the sheer quantity makes that a fair trade. If you burn through bits fast, this is the smart bulk buy.
The smart bulk angle
- Ten spares of the most-used anchor size
- Drilled dozens of holes in hard stone basement
- Shockproof hex shank for hammer mode stability
The size catch
- Only 3/16-inch—no bigger sizes for large anchors
- Mixed durability reports on tip life
Buy this if: you go through 3/16-inch bits quickly and want a full box of spares.
Think twice if: you need a range of sizes for varied anchor work.
5. DYRECELVE 12-Piece Masonry Drill Bit Set
A 12-bit lineup in seven sizes that survived daily mortar drilling for six months straight.
Shoppers say using these daily for six months on mortar and finding them “still strong,” which is a serious durability flex for a set in this class. The YG6X tungsten carbide cross tips give you four contact edges that match concrete, brick, cinder block, tile, ceramic, and glass. The cross geometry digs in and starts a hole without skating.
The 12 pieces span 1/8″, 5/32″, 3/16″, 1/4″, 5/16″, 3/8″, and 1/2″, and that range is a genuine strength. You get two 3/16-inch, four 1/4-inch, and two 5/16-inch bits—the sizes you’ll actually grab for wall anchors. At 9.8 ounces, it is 11% heavier than the DEWALT 7-piece, but you are carrying five extra bits. The 1/4-inch hex shank locks into quick-change chucks, though it is not for SDS-Plus hammers.
Buyers report the hex shank can slip in quick-change chucks under heavy load, so keep pressure steady. Quality gets mixed marks overall, but the specific feedback on mortar drilling is overwhelmingly positive. With the black electrophoretic finish and transparent case for organization, it is a tidy, versatile kit for brick and mortar work.
The long-game play
- 12 bits in 7 sizes covers most anchor jobs
- Cross-shaped YG6X carbide tip starts clean
- Proven for daily mortar drilling over months
Watch for
- Hex shank can slip in quick-change chucks under load
- Not compatible with SDS-Plus rotary hammers
Choose this for: the widest single-case size variety for mortar, brick, and tile around the house.
Consider another if: you only ever use one or two bit sizes and want maximum durability per bit.
6. FEWELL Masonry Drill Bits, 10-Piece Set
The budget set that bored 20 clean holes through concrete block and a cement floor without fading.
Owners mention these cut “like the best and quickest” bits they’ve used, with identical performance from hole one to hole twenty in concrete block and cement. The high-cobalt alloy body is pitched as more wear-resistant than YG6X, and the spear-point tip grinds through brick, tile, glass, and ceramic. The 1/4-inch hex shank locks into Milwaukee and other quick-change chucks.
At 0.5 inches max cutting diameter, the 10 bits span 1/8″ to 1/2″, giving you a full size ladder in one box. The spear point runs through ceramic tile “like butter” and stays neat and fast. One owner even used them to drill through brick to mount a landscaping transformer—real-world proof for outdoor work.
The honest caveat is that quality, durability, and value get mixed marks in the review pool, even though functionality is praised. The maker also advises keeping bits cool with water and drilling vertically. If you want a cheap, capable set for occasional home jobs, this fits; just don’t expect the longevity of a premium brand.
Entry-level value: a full 1/8″ to 1/2″ size run that breezes through 20-hole jobs on concrete and brick.
The budget reality: mixed long-term durability feedback means this shines for lighter use, not daily pro drilling.
7. TITGGI 12-Piece Wide-Tip Masonry Drill Bit Set
A 12-piece garage organizer whose wide flutes let it cut concrete and brick without overheating.
One buyer who drilled 17 holes in their garage reports the bits “cut through concrete and brick smoothly without overheating or dulling out halfway through the first hole.” That performance comes from the wide-flute design, which clears dust quickly and prevents heat buildup—the main reason cheaper bits fail. The YG6X hard alloy tips (a tungsten-carbide grade known for toughness) are fully polished and rustproof, so they stay sharp longer.
You get 12 bits in 10 distinct sizes, from 5/32″ up to 1/2″, with six of those being 1/4-inch bits—clearly the size the maker expects you to reach for most. The double U-type groove and spiral handle push dust out quickly. The hexagonal handle keeps the bit tight and safe in the chuck.
The catch is durability: while performance gets props, the review pages show some bits breaking after one use—a real but not universal experience. If you are a steady DIYer who drills brick and concrete a few times a month, the size range and smooth cutting make it a solid pick. Daily professional abuse might be too much for it.
The convenience factor
- 12 bits in 10 sizes for step-up drilling
- Wide flutes prevent overheating on brick
- Hexagonal handle stays secure in the chuck
The durability question
- Some customers note bits snapping after the first use
- Best for moderate DIY, not daily pro work
Great for: the home workshop with varied jobs who wants one organized case of brick-ready sizes.
Look past it if: you need bits that survive a full commercial work week without fail.
8. BGTEC Tile & Masonry Drill Bit Set, 10-Piece
The guide-point specialist that started clean holes in a tiled shower without chipping a single tile.
Buyers hung glass corner shelves in a tiled shower “with no problem” and praised the clean holes for screw anchors. That is the guide-point tip working—it both drills and locates the hole, avoiding the slippage that ruins tiles and mars brick faces. The YG6X cemented carbide core resists wear across tile, porcelain, brick, concrete, and glass.
The 10 bits cover 5mm to 12mm, with two of the smallest and four 6mm bits for common anchors. Reviewers point out success drilling through granite with a single bit, and roughly six holes in about 30 minutes on tough material. The guide point lets you start at a 45-degree angle to punch in, then straighten up—a technique owners recommend.
The recurring advice is water cooling: drilling 1/4-inch holes took ten minutes without water but dropped to 60-90 seconds per hole when dipped every 20-30 seconds. The maker even warns that hard materials need water or coolant. If your work is tile, glass, and brick where a clean start matters, this is the set to beat.
The precision edge: the guide-point tip starts true, which is everything when you don’t want to chip tile or scar brick.
Work the method: keep water or coolant handy—it dramatically speeds up holes and protects the bits.
9. BOSCH 5-Piece Hammer Drill Bits (LBH0025)
Five identical 5/32-inch bits with an asymmetric diamond-ground tip for precise, non-wandering starts.
The defining feature here is the asymmetric diamond-ground carbide tip, which is engineered for precise starts on block, masonry, and concrete. Shoppers say about 75 holes drilled with a single bit into basement concrete, and it was “still going.” The milled U-flutes with a deep-cut spiral pull concrete dust out of the hole quickly.
All five bits are the same 5/32-inch size, making this a specialist kit for pilot holes and smaller anchors rather than a general-purpose set. The grip shank provides aggressive gripping power in the chuck, and owners appreciate the little flats that stop the bit from slipping. At 2.08 ounces, it is featherlight and easy to carry on a job.
The trade-off is obvious: no size variety. Durability gets mixed reviews—some call the bits eternal, others find them flimsy. One owner notes the holes come out slightly smaller than Tapcon drill bits, making screw insertion a tight squeeze. If you consistently drill 5/32-inch pilot holes into concrete or block, this is a precision tool; otherwise, you’ll want a mixed set.
The precision case
- Diamond-ground tip starts exactly where you aim
- Milled U-flutes remove concrete dust fast
- Grip shank with flats won’t slip in the chuck
The narrow lane
- All bits are 5/32-inch—no size range
- Mixed durability reports on long-term use
Perfect for: pros who drill the same 5/32-inch pilot hole all day and want pinpoint starts.
Not for: DIYers who need a spread of sizes for different anchors.
Understanding the Specs
Carbide Tip Composition
The grade of tungsten carbide, like YG6X or YG8X, tells you the hardness and wear resistance of the cutting edge. A cross-shaped tip with multiple contact edges gives you a more stable start on brick, while a spear or guide point suits tile and glass. Harder carbide stays sharp longer in abrasive brick, but it can be more brittle.
Shank Types and Chuck Fit
Round shanks fit standard three-jaw drill chucks and often have flats to stop slippage. 1/4-inch hex shanks lock into impact drivers and quick-change chucks for convenient swapping. SDS-Plus shanks only fit SDS-Plus rotary hammers—check your tool before buying or you’ll have bits with no home.
FAQ
What is the difference between SDS-Plus and regular masonry drill bits?
Can I use these drill bits in a regular cordless drill?
How long do carbide masonry drill bits last on brick?
Do I need water to drill through brick?
How do I stop the drill bit from slipping or wandering on brick?
What is the difference between YG6X and YG8X carbide?
Which drill bit size should I use for wall anchors in brick?
Are 12-piece masonry sets better than 7-piece sets?
Can masonry drill bits also cut through tile and glass?
Final Thoughts: The Verdict
The crowd favorite — 4.7 stars across 8,600+ owners — is the DEWALT 7-Piece because its four-flute design and trusted carbide tips make quick work of tough concrete block. If you own an SDS-Plus rotary hammer, the Makita 5-Piece is the aggressive upgrade that shreds through old brick. And for the budget-conscious DIYer who wants a full size ladder without the premium price, the FEWELL 10-Piece is the one to reach for.
How We Picked
We do not accept paid placement. Every pick is matched to a real buyer and a real use-case; we do not hands-on test units.
Sources & Methodology
Specifications: manufacturer listings and product documentation. Review insights: verified customer reviews, as of September 2026. Pricing: not shown on this page (it changes often); check the current price via the retailer link.
As an Amazon Associate, Gardening Beyond earns from qualifying purchases. This does not affect which products we feature.