Our readers keep the lights on and the coffee maker working hard! As an Amazon Associate, I earn from qualifying purchases.
The right tool turns that nightmare repair into a clean, controlled operation, whether you’re raking out old, crumbly mortar or striking a fresh, weathertight bead.
I’m Mohammad Maruf — the founder and writer behind Gardening Beyond. I’ve spent years studying masonry tool specifications, comparing carbon steel forging methods against tungsten carbide durability, and cross-referencing aggregated field reports from both professional bricklayers and weekend repointing crews.
This guide breaks down five distinctly different approaches to the task, from rugged raking bits to precision finishing trowels, so you can pick the best mortar joint tool for your specific repair or new-build project without wasting time on tools that can’t handle the grit.
How To Choose The Best Mortar Joint Tool
Choosing the right mortar joint tool starts with understanding the actual task: are you scraping out old, loose mortar from between existing brickwork, or are you spreading and finishing fresh mortar on new construction or tile? The tool geometry and material must match the specific phase of work.
Blade Material and Construction
A mortar tool’s blade sees constant abrasion from sand, cement, and brick debris. High carbon steel, like that used in MARSHALLTOWN trowels, holds a sharp edge far longer than standard stainless steel but demands immediate drying after use to prevent rust. For raking and routing tasks, a tungsten carbide tip (TCT) is mandatory — it chews through cured mortar without dulling after a few passes. Stainless steel offers corrosion resistance but tends to blunt faster on gritty mortar lines.
Handle Ergonomics and Grip
Mortar work is repetitive and often overhead or at waist level for extended periods. A DuraSoft rubberized overmold, as found on premium margin trowels, significantly reduces vibration transfer and hand fatigue compared to bare wood handles. For trowels with aluminum shanks and rivetless construction, the elimination of material buildup in crevices also reduces the need for constant scraping, letting you maintain a fluid rhythm during finishing.
Tool Geometry: Notch Shape and Blade Width
For spreading mortar or tile adhesive, a notched trowel with the correct notch size is critical. A 1/4-inch square notch suits small mosaic tile, while a 1/2-inch notch is necessary for larger floor tiles to achieve proper coverage and bond strength. For repointing, a blade width of 2 to 4 inches is ideal — wide enough to carry a useful load of mortar, yet narrow enough to maneuver between tight brick courses.
Quick Comparison
On smaller screens, swipe sideways to see the full table.
| Model | Category | Best For | Key Spec | Amazon |
|---|---|---|---|---|
| Goldblatt 3-Piece Drywall Trowel | Premium Set | Professional plaster & concrete finishing | Carbon steel blade, 14 inch | Amazon |
| Uni-Hosen 6-Piece Masonry Set | Premium Set | Full masonry kit: spreading & jointing | Stainless steel, 11.02 inch trowel | Amazon |
| Faithfull FAIMMR10 Mortar Rake | Power Bit | Rapid mortar removal for repointing | 10 mm tungsten carbide tip | Amazon |
| Tile Tools Stainless Steel Notched Trowel Set | Mid-Range Kit | DIY tile installation & grouting | Polished stainless, 3 notch sizes | Amazon |
| MARSHALLTOWN Margin Trowel | Premium Hand Tool | Precision spreading in tight spaces | High carbon steel, 6×2 inch blade | Amazon |
In‑Depth Reviews
1. Goldblatt 3-Piece Drywall Trowel
Goldblatt’s three-piece set offers carbon steel blades in 14×4, 12×4, and 8×3 inch sizes — a range that covers everything from broad concrete finishing to detailed corner work. The carbon steel maintains a sharper edge than stainless alternatives and resists bending under heavy pressure, which is critical when you’re forcing mortar into tight joints or leveling a fresh slab.
The ergonomic wooden handles are smooth and comfortable, and the blades are precision-welded to the tang for long-term stability. Users report that the flat blades with sharp square corners produce clean, straight lines without streak marks, making this set a reliable choice for professional plastering and masonry finishing alike.
One trade-off: carbon steel is prone to rust if left damp. Immediate drying after use is non-negotiable, but the performance gain over stainless is substantial. For masons who need a versatile, durable set that delivers a flawless finish across multiple substrates, this kit delivers professional-grade results at a mid-range investment.
What works
- Three sizes cover broad finishing to detail corners
- Carbon steel holds sharp edge longer than stainless
- Precision-welded tang for stability under load
- Ergonomic wood handles reduce fatigue
What doesn’t
- Requires thorough drying to prevent rust
- No rubber overmold for extra vibration damping
2. Uni-Hosen 6-Piece Masonry Hand Tool Set
This six-piece set includes a large 11.02×4.72 inch concrete finishing trowel, a pointing trowel, a margin trowel, and a convex brick jointer — essentially everything needed for a full repointing or new brickwork project. The stainless steel blade resists corrosion and chemical stains from wet mortar, making cleanup quick compared to carbon steel alternatives.
The rivetless blade construction is a standout feature: there are no crevices where mortar can accumulate and harden, which means a smoother, streak-free finish without constant scraping. The aluminum shank paired with a soft-grip rubber overmold handle significantly reduces hand and wrist fatigue during extended use, a benefit confirmed by users working on brick firepits and wall patching.
The trade-off is that stainless steel does not hold a razor edge as long as carbon steel, though for most masonry tasks this is rarely a limiting factor. For the mason or serious DIYer who wants a complete kit that covers both spreading and jointing without the corrosion worry, this set offers excellent versatility and durability.
What works
- Rivetless construction prevents mortar buildup
- Stainless steel resists rust and is easy to clean
- Soft-grip handle reduces vibration
- Complete 6-piece kit covers all masonry tasks
What doesn’t
- Stainless steel edge dulls faster than carbon steel
- Some users found the handle balance slightly blade-heavy
3. Faithfull FAIMMR10 Masonry and Mortar Rake/Router
If you are repointing a large brick wall, hammer and chisel is a punishingly slow method. The Faithfull FAIMMR10 is a 10mm tungsten carbide tipped (TCT) router bit designed for use with a standard power drill that has a 1/2-inch chuck. This tool excels at rapidly removing old, soft mortar from between brick courses, turning a day-long job into an hour-long task.
The tungsten carbide tip is engineered to eat through cured mortar without significant dulling, and users confirm it works far faster than manual methods. Holding the drill at a 30-45 degree angle to the wall allows the bit to clear mortar more efficiently, and the bit is also useful for creating channels in plaster or cement for recessing electrical cable runs.
One limitation: the 10mm bit length may not reach the full depth of a standard brick (approx. 3-1/2 inches), so deeper joints may require a longer bit or a secondary pass. For surface-level removal and cleaning out deteriorated mortar to a depth of about 1 inch, however, this tool is remarkably effective and a huge time saver.
What works
- Removes soft mortar drastically faster than chisel
- Tungsten carbide tip resists dulling
- Works with standard 1/2-inch drill chuck
- Multi-purpose for chasing channels in plaster
What doesn’t
- Bit length too short for full brick depth
- Requires constant drill speed to avoid binding
4. Tile Tools Stainless Steel Square Notch Trowel Set
This kit is purpose-built for the weekend tiler: three square-notch trowels in 4mm, 8mm, and 12mm sizes, plus a rubber grout float and two grout sponges. The polished stainless steel blades (0.7mm thick) resist corrosion and clean up easily, while the aluminum shank and rivetless construction prevent mortar from accumulating in hard-to-clean spots.
The notch size range is well-chosen — the 4mm notch suits small wall tiles, the 8mm notch handles standard subway tiles, and the 12mm notch is appropriate for larger floor tiles requiring a thicker mortar bed. The rubber float features a pure gum face and aluminum back plate, which makes spreading grout smooth and the cleanup simple.
As a budget-friendly starter set, the value is strong, but the 0.7mm blade thickness is noticeably thinner than professional trowels, and experienced tilers may prefer a heavier gauge for consistent pressure during spreading. For the home renovator completing a bathroom or kitchen backsplash, this kit provides everything needed to spread mortar and finish grouting.
What works
- Three notch sizes suit small to large tiles
- Includes rubber float and grout sponges
- Stainless steel resists rust and cleans easily
- Great value for DIY tile projects
What doesn’t
- Thinner blade (0.7mm) less stiff than pro grade
- Handle design may feel small for large hands
5. MARSHALLTOWN Margin Trowel
The MARSHALLTOWN 56D margin trowel features a 6×2 inch blade forged from a single piece of high carbon steel, which is then tempered, ground, and polished for optimal balance and flexibility. This isn’t a generic stamped trowel — the one-piece forged construction ensures the blade won’t separate from the tang under torque, a common failure point in cheaper tools.
The DuraSoft handle is a standout for extended use: it reduces vibration and provides a comfortable, secure grip that users with tendonitis report significantly reduces wrist pain during hours of scraping and spreading. The slim flat-nosed design allows it to reach into tight corners and between close-set bricks where a larger trowel cannot fit, making it indispensable for detail work and precise mortar application.
Being high carbon steel, the blade will rust if not dried thoroughly after use — a quick wipe and dry storage keep it in prime condition. For the mason, archaeologist, or tile setter who needs a durable, precision margin trowel that can handle heavy daily use and still fit into the tightest spaces, this USA-made tool is a long-term investment in accuracy.
What works
- One-piece forged high carbon steel for durability
- DuraSoft handle reduces fatigue and wrist pain
- Slim 2-inch blade fits tight spaces
- Made in the USA with premium materials
What doesn’t
- Requires oiling and dry storage to prevent rust
- Single tool — no multi-piece kit included
Hardware & Specs Guide
Blade Material
High carbon steel trowels hold a sharper edge and resist bending under heavy pressure, making them ideal for finishing and precision spreading. Stainless steel resists rust and cleans up quickly but dulls faster when scraping cured mortar. For power-assisted removal, tungsten carbide tipped (TCT) router bits are essential — they cut through hard mortar without losing their abrasive edge for dozens of uses.
Notch Size and Trowel Geometry
Notched trowels use square or V-shaped notches to control the thickness of adhesive or mortar. A 1/4-inch (6mm) notch is suitable for small wall tiles, while 1/2-inch (12mm) notches are required for large floor tiles. The blade width determines reach: a 2-inch margin trowel fits tight brick joints, while a 14-inch finishing trowel covers large surfaces efficiently. Rivetless construction prevents mortar accumulation for a cleaner finish.
FAQ
Can I use a notched trowel for scraping out old mortar?
How do I prevent my carbon steel trowel from rusting?
Final Thoughts: The Verdict
For most masons and serious DIYers, the best mortar joint tool winner is the Goldblatt 3-Piece Drywall Trowel because its carbon steel blades and three-size kit offer professional finishing versatility across concrete, plaster, and masonry. If you need a complete repointing kit that resists rust and includes a brick jointer, grab the Uni-Hosen 6-Piece Masonry Set. And for rapid mortar removal on large repointing projects, nothing beats the Faithfull FAIMMR10 Mortar Rake for saving hours of manual chiseling.





