7 Best Carbide Drill Bits For Hardened Steel | Bite Harder

Our readers keep the lights on and the coffee maker working hard! As an Amazon Associate, I earn from qualifying purchases.

Drilling into hardened steel or stainless plate with a standard high-speed steel bit is an exercise in futility—the tip glazes over, the cutting edge dulls instantly, and you end up with a smoking, ruined bit and a shallow divot. A proper carbide or cobalt-infused bit with a 135° split point changes that dynamic entirely, letting you penetrate work-hardened surfaces without excessive pressure or heat buildup.

I’m Mohammad Maruf — the founder and writer behind Gardening Beyond. I’ve spent years analyzing metal-cutting tool specifications, studying heat-treatment data on M35 and carbide grades, and cross-referencing owner feedback to determine which bits actually survive contact with armor plate, spring steel, and cast-iron machinery.

This guide breaks down the specific geometries, coatings, and shank designs that separate disposable bits from true performers, helping you pick a set that won’t fail mid-job. Whether you’re a machinist, fabricator, or serious DIYer, understanding the difference between M35 cobalt and TiAlN-coated carbide is critical before investing in your next carbide drill bits for hardened steel.

How To Choose The Best Carbide Drill Bits For Hardened Steel

Not all drill bits labeled “for metal” can handle the surface hardness of heat-treated alloys. The three specs that determine success are material composition, point geometry, and coating. Ignore any of these and you’ll be buying replacements within a week.

Material composition: M35 cobalt vs. solid carbide

M35 high-speed steel contains 5% cobalt, which raises the red-hardness threshold so the cutting edge stays sharp at higher temperatures. Solid carbide is significantly harder but more brittle—ideal for CNC operations with rigid spindles but risky in hand drills where side-loading can cause chipping. For most field work, M35 cobalt provides the best balance of toughness and wear resistance.

Point geometry: the 135° split point advantage

A standard 118° point requires more thrust and tends to “walk” across a smooth surface. The 135° split-point design reduces the effective chisel edge, allowing the bit to self-center and penetrate with less pressure. This is critical on hardened steel because excessive downward force generates heat that work-hardens the material further, killing the bit.

Coatings that extend tool life

Titanium Aluminum Nitride (TiAlN) is the gold standard for high-temperature drilling—it maintains hardness up to 1500°F. Amber oxide and titanium nitride coatings offer moderate protection but break down faster above 800°F. Uncoated M35 bits work fine with proper lubrication, but a good coating reduces friction and clears chips more efficiently.

Quick Comparison

On smaller screens, swipe sideways to see the full table.

Model Category Best For Key Spec Amazon
KENDO 29PCS Cobalt Set Mid-Range All-around hardened steel drilling 29 pieces, 1/16″–1/2″, bronze steam finish Amazon
toolant Cobalt Pro 21-Piece Mid-Range Extreme heat resistance with TiAlN coating 21 pieces, TiAlN coating, 89HRC surface hardness Amazon
CaRoller 29-Piece M35 Set Premium Portable job-site drilling 29 pieces, amber coating, cup-type holder Amazon
MACXCOIP Metric 25-Piece Premium Metric-sized precision work 25 pieces, 1.0–13mm, steel index case Amazon
HIDOTOL 115-Piece M35 Set Premium Full fractional, letter & wire gauge coverage 115 pieces, combination index case Amazon
Sabre Tools 1/2″ Cobalt 5-Piece Budget Heavy single-size production holes 5 pieces, 1/2″ × 6″, pilot point Amazon
LU&MN M35 Jobber 5-Piece Budget Occasional hardened steel repairs 5 pieces, 1/2″, 135° split point Amazon

In‑Depth Reviews

Best Overall

1. KENDO 29PCS Cobalt Drill Bit Set (1/16”-1/2”)

29 PiecesBronze Steam Finish

The KENDO set covers the full fractional range from 1/16″ up to 1/2″ in 1/64″ increments, giving you 29 individual bits that span nearly every hole size a metalworker encounters. Each bit is forged from M35 cobalt high-speed steel and receives a bronze steam oxide surface treatment that improves lubricity and corrosion resistance while retaining the core toughness needed for interrupted cuts.

What sets this kit apart is the 135° split-point grind on every bit—even the tiny 1/16″ size self-centers without walking, which is rare at this price tier. The thick-web design adds rigidity to the core, reducing the risk of torsional breakage when you’re pushing through 1/4″ cold-rolled steel or stainless. Owners report drilling 75 holes per bit in mild steel before any measurable dulling occurs.

The metal index case keeps everything organized with clearly marked size slots, though a few users note the plastic tray insert can be finicky when reseating bits. For a mid-range price, you’re getting professional-grade edge geometry and a size selection that eliminates the need for multiple separate sets.

What works

  • Full 29-size coverage with 1/64″ steps
  • 135° split-point grinds on every bit reduce walk
  • Bronze steam coating extends corrosion resistance

What doesn’t

  • Plastic tray inside metal case can be stiff
  • Bits require cutting oil for stainless work
TiAlN Coated

2. toolant Cobalt Drill Bit Set for Metal and Steel (Pro) 21-Piece

21 PiecesTiAlN Coating

The toolant Pro set takes a different approach by applying a Titanium Aluminum Nitride (TiAlN) coating to its M35 cobalt steel substrate. TiAlN is significantly harder than standard TiN—up to 89 HRC surface hardness—and maintains its integrity at temperatures that would degrade lesser coatings, making this the best choice for drilling hardened alloys and stainless at higher spindle speeds.

The bullet-point tip is a variation of the 135° split-point design with a more pronounced self-centering cone, which owners say practically eliminates walking on smooth steel plate. The set includes 21 pieces from 1/16″ to 1/2″, with duplicate sizes in the smaller fractions so you have spares for the bits that take the most abuse. After drilling 60 holes through heavy-duty trailer frame steel, one reviewer reported zero performance loss.

The 3-flat shank provides better grip in keyless chucks compared to round shanks, reducing slippage under heavy feed pressure. The only downside is the set stops at 1/2″—there are no intermediate sizes between 3/8″ and 1/2″, so if you need 7/16″ you’ll need a separate bit.

What works

  • TiAlN coating resists heat up to 1500°F
  • Bullet-point tip nearly eliminates walk
  • 3-flat shank holds securely in keyless chucks

What doesn’t

  • No 7/16″ or other mid-size bits included
  • Smaller bits can snap if feed rate is too aggressive
Portable Cup Case

3. CaRoller Cobalt Drill Bit Set 29-Piece M35

29 PiecesAmber Coating

The CaRoller 29-piece kit is engineered for tradespeople who need bits accessible on a tool belt. The cup-type round holder clips onto a belt loop and flips open to reveal 29 individually sized pockets, so you never have to fumble through a flat case on a ladder or scaffold. The bits themselves are M35 cobalt with an amber oxide coating that provides a modest heat barrier and improves chip evacuation.

Each bit uses a 135° split point with a round straight shank, and the fully ground twist flute design minimizes friction during deep plunges. Owners report drilling 30 holes through steel I-beam with a single bit before noticing significant edge wear, provided they maintain slow spindle speeds and consistent cutting oil application. The amber coating is less durable than TiAlN but sufficient for most field work.

The case expands slightly when fully packed, which some users appreciate for easy removal, but the plastic latch can loosen over time if the case is frequently dropped. For a premium price, you’re paying largely for the organizational convenience—the bits themselves are solid mid-range performers.

What works

  • Cup-type holder clips to tool belt for quick access
  • Fully ground flute design reduces friction
  • 29 sizes cover most common fractional holes

What doesn’t

  • Amber coating less heat-resistant than TiAlN
  • Plastic case latch may loosen with heavy use
Metric Precision

4. MACXCOIP Metric 25Pcs M35 Cobalt Drill Bit Set, 1.0mm-13.0mm

25 PiecesMetric Sizes

For machinists working to metric tolerances, the MACXCOIP set provides 25 individually sized bits from 1.0mm up to 13.0mm in 0.5mm increments. This eliminates the guesswork of converting fractional sizes and ensures a precise fit for metric-thread tapping and dowel-pin holes. Each bit is constructed from M35 cobalt steel with a 135° split-point spear tip that self-centers aggressively.

The twist flute geometry is optimized for chip clearance in deeper bores, and the straight round shank fits standard drill chucks and collets without wobble. Owners who are former CNC machinists confirm the grind quality matches production-level tooling, with balanced cutting edges that produce consistent chip formation. The bits handle stainless, cast iron, and titanium alloy effectively when used with cutting fluid.

The metal index case is slim enough to fit in shallow toolbox drawers, and each size is clearly stamped on both the bit shank and the case slot. One minor complaint is that the shank on the 10mm bit can slip in a drill press chuck if the collet isn’t tightened firmly, but this is typical for straight-shank tooling at this price level.

What works

  • Full metric range from 1mm to 13mm in 0.5mm steps
  • CNC-quality grind with balanced cutting edges
  • Compact case fits shallow tool chest drawers

What doesn’t

  • Round shank can slip if chuck isn’t tightened well
  • No duplicate sizes for smaller fragile bits
Full Coverage Set

5. HIDOTOL 115PCS Cobalt Drill Bit Set M35 HSS

115 PiecesFractional + Letter + Wire

The HIDOTOL 115-piece set is the ultimate comprehensive solution for shops that need every size from fractional 1/16″–1/2″, letter A–Z, and wire gauge #1–#60 in one organized case. All bits are M35 cobalt steel with a 135° split-point grind, ensuring that even the smallest #60 wire bit self-centers rather than skating across the workpiece surface.

The metal index case is heavy-duty—weighing 7.5 pounds fully loaded—with a hinged lid and individual size-indexed slots. Owners note that the grind quality is consistent across all three size families, with double-bevel points on smaller bits that are often unevenly ground in cheaper sets. The bits cut cleanly through hardened steel, stainless, and titanium when proper speed and lubrication guidelines are followed.

Given the sheer number of bits, the price per bit is very aggressive. The trade-off is that you’re getting M35 cobalt, not solid carbide, so extremely abrasive materials like high-nickel superalloys will still wear these out faster than carbide. For 95% of metalworking tasks, though, this set eliminates the need to ever buy a single-size replacement again.

What works

  • 115 bits cover fractional, letter, and wire sizes
  • Consistent grind quality across all three families
  • Heavy-duty metal case protects inventory

What doesn’t

  • Heavy case at 7.5 lbs not ideal for portability
  • M35 cobalt slower than carbide on superalloys
Heavy Duty

6. Sabre Tools 1/2 Inch Cobalt Drill Bits 5-Piece Heavy-Duty

5 PiecesPilot Point

When you need to drill a high volume of 1/2″ holes through structural steel, the Sabre Tools 5-pack delivers exceptional value. Each bit is 6 inches long with a pilot-point tip that prevents skating and a heavy-duty M35 cobalt body capable of withstanding the heat generated by repetitive production drilling. One owner reported drilling 96 holes through 3/8″ A36 steel with a single bit, using only compressed air for cooling.

The three-flute design is unusual for drill bits—most have two flutes—and it improves chip evacuation in deeper holes while adding rigidity to the core. The pilot point geometry works like a mini center drill, allowing the bit to start accurately without a center punch on many surfaces. The titanium finish adds a layer of lubricity that reduces friction during the cut.

The set includes only 1/2″ bits, which limits its utility to those specific applications. If you need multiple sizes, you’ll have to buy separate sets. But for production shops that go through half-inch holes regularly, the per-bit cost is low enough that you can treat them as semi-consumable and still come out ahead.

What works

  • 96 holes per bit in A36 steel in real-world testing
  • Three-flute design improves chip clearance
  • Pilot-point tip reduces need for center punching

What doesn’t

  • Only available in 1/2″ size
  • 6″ length may be too long for tight clearance areas
Budget Pick

7. LU&MN M35 Jobber Drill Bits 5-Piece, 1/2″

5 Pieces135° Split Point

The LU&MN M35 Jobber bits are the most affordable entry point into cobalt tooling for hardened steel. Each 1/2″ bit features a 135° split-point grind that self-centers effectively, and the uncoated M35 substrate provides solid heat resistance for occasional use. Owners report these bits cutting through 1/4″ steel plate and stainless tubing without hesitation, outperforming standard HSS bits that merely skate across the surface.

What you sacrifice at this price tier is edge longevity under sustained heavy use. Several owners noted that the smallest bit in the set broke after a minute of aggressive drilling, likely due to user feed pressure rather than material defect. When run at proper speeds with cutting oil, the bits produce clean holes in cast iron and aluminum as well.

The plastic storage case is basic but functional, keeping the five bits organized. For the occasional fabricator who needs to drill hardened steel a few times a month, this set provides adequate performance without the upfront cost of a full 29-piece kit. The durability ceiling is lower than premium options, so production work will wear these out faster.

What works

  • Low entry price for M35 cobalt material
  • 135° split-point works well on stainless
  • Includes plastic case for basic storage

What doesn’t

  • Uncoated bits dull faster under sustained use
  • Small bits prone to breakage if feed is too aggressive

Hardware & Specs Guide

135° Split Point Geometry

This self-centering tip reduces the chisel edge width by 40% compared to a standard 118° point, requiring less thrust to initiate the cut. On hardened steel, lower thrust means less heat generation at the cutting edge, which directly reduces work-hardening. Every bit in this guide uses a 135° split point—the only geometry that reliably prevents walking on smooth, heat-treated surfaces.

M35 Cobalt vs. Solid Carbide

M35 high-speed steel contains 5% cobalt, raising its red-hardness threshold to approximately 1100°F before the cutting edge softens. Solid carbide maintains hardness above 1800°F but is brittle—a side-load from a hand drill can chip the cutting edge instantly. For field drilling with hand tools or drill presses, M35 provides the necessary toughness while still handling hardened alloys up to 45 HRC effectively.

FAQ

What spindle speed should I use when drilling hardened steel with cobalt bits?
For 1/2″ M35 cobalt bits, run your drill press or hand drill at 300–500 RPM. Hardened steel requires slow rotational speed and moderate, steady pressure to avoid overheating the cutting edge. Faster speeds generate friction that work-hardens the material and glazes the bit tip.
Can I use cobalt drill bits without cutting oil on hardened steel?
You can in short bursts if you use compressed air to cool the bit, but cutting oil dramatically extends tool life by reducing friction and flushing chips. For production work, never run dry—use a sulfur-based cutting oil or Moly-Dee at the contact point.
Do I need a center punch before using a 135° split-point bit?
Not always—the split-point is self-centering on most flat surfaces. However, on convex or curved hardened steel, a small center punch mark provides additional guidance and prevents the bit from skating. Start at very low RPM until the tip bites.
How do I know if my drill bit is M35 cobalt vs. standard HSS?
Look for “M35” or “5% Co” stamped on the shank. Genuine M35 has a darker bronze or straw color from the heat-treatment process, while standard HSS is bright silver. A magnet test is inconclusive—both are ferrous. The price is also a giveaway; M35 sets cost roughly twice as much as equivalent HSS sets.

Final Thoughts: The Verdict

For most fabricators and serious DIYers, the carbide drill bits for hardened steel winner is the KENDO 29PCS Cobalt Set because it delivers a complete fractional size range with consistent 135° split-point grind quality at a mid-range price. If you need maximum heat resistance for prolonged stainless drilling, grab the toolant Cobalt Pro 21-Piece Set with its TiAlN coating. And for metric-focused machining work, nothing beats the MACXCOIP Metric 25-Piece Set.

Please use a real email you check. If it's fake or mistyped, your message won't reach us and we can't reply — wrong addresses are rejected automatically.