11 Best Cordless Drill and Impact Driver Set

Check Price on Amazon

The brushless compact that convinced skeptics — 17 torque settings, a halo worklight, and the lightest price tag here.

Brushless motors cut friction and heat — this kit’s digital brushless motor delivers up to 450 in-lbs of torque in a compact body. What owners bring up most is build quality, with value and reliability close behind. The 17-stage torque adjustment plus a dedicated drill mode covers everything from delicate furniture assembly to driving 2-inch screws into softwood without stripping heads.

Two features stand out once you actually use the tools. First, the 1/2-inch single-sleeve keyless chuck — it lets you change drill bits one-handed. Second, the impact driver’s halo light puts out light on the work surface without shadows, and that light stays on for up to 10 minutes after you stop pulling the trigger. The impact driver also adds a control mode that cuts down on screw cam-out and cross-threading, and a one-handed collet for quick bit swaps. The kit ships with a 2.0Ah battery and the PWR Jump charger, so it arrives ready to run. Buyers find the battery lasts through a typical home repair session.

Battery life is the honest caveat — buyers report it ranges from solid to disappointing, with the occasional unit draining fast on a full charge. That’s the trade-off of a compact 2.0Ah pack in a high-torque tool. The charger’s fan is also loud, and one charger-bay quirk — batteries needing a firm push to seat — comes up in feedback. Neither is a dealbreaker for a home kit whose 17-stage clutch and 10-minute halo light most owners describe as a bargain.

Check Price on Amazon

The one kit whose batteries double as a phone charger — USB-C on the pack itself changes the whole routine.

The 1/2-inch drill handles 400 in-lbs at up to 2,000 RPM with a 2-speed transmission, so you have precision at low speed and speed at high. It also runs on a 24V platform, and its 2A batteries carry more amp-hour capacity than the smaller 1.3A packs on the entry-level DEWALT kit — meaning longer work between charges.

The genuinely different part is the battery. Each of the two 2.0Ah USB-C packs works as a 12,000mAh power bank, with two-way USB-C so the same port charges and discharges. The included 65W charger is a three-port unit that fast-charges phones, tablets, and notebooks, with 110-240V input for international travel. Owners who care about value, battery life, and performance rate this kit the highest of the group. One reviewer noted it takes about an hour to charge both batteries — reasonable for the payoff of never needing a dedicated tool charger again.

The 24V battery locks you into Greenworks’ own platform — no cross-compatibility with DEWALT, Makita, or Milwaukee packs. It’s also aimed at home and DIY work, not construction sites, where a heavier-duty platform fits better. If you already run Greenworks 24V outdoor tools or travel with USB-C gear, both trade-offs vanish.

Check Price on Amazon

A homeowner-grade kit that runs on stout V20 power and delivers pro-level runtime from a well-known name.

The first number worth knowing here is 1,500 in-lbs of torque on the impact driver, paired with 2,800 RPM and 3,500 IPM. Put plainly, that’s more twisting force than the Greenworks kit’s impact driver exerts, and enough to run 3-inch lag screws straight into ceiling joists. The drill/driver produces 350 unit watts out, which is a measure of how much work the motor can do in heavy-duty jobsite conditions.

Two brushless motors extend runtime — up to 25% more for the drill and up to 30% more for the impact driver compared to brushed equivalents. The drill’s 2-speed gearbox covers 0-600 and 0-1,900 RPM, and its 1/2-inch ratcheting chuck holds bits tightly so they don’t slip mid-drill. Two 1.5Ah V20 batteries and a charger ship in the box. What buyers single out most is quality — consistently positive — followed by value and functionality. A retired tradesman noted the tools were smooth, powerful, and comfortable even for size 10 hands.

Charging is where feedback splits — some owners mention great battery performance while others run into charging issues, so the honest read is that this system can be fussy. The 1.5Ah packs also mean a shorter work window than bigger platforms. Neither point takes away from what is otherwise a well-liked kit that trades nothing on feel.

Check Price on Amazon

The kit that bets on itself — register within 30 days and the tool, battery, and charger carry a limited lifetime warranty.

Pick this one up and the heft tells you it’s not a plastic-bodied kit. Two 2.5Ah lithium-ion batteries come in the box along with a 160W fast charger — a 2.5Ah pack holds more charge than the 1.5Ah packs on entry kits, so you work longer between swaps. Register the tool, battery, or charger within 30 days to lock in the limited lifetime warranty, which is the standout term in this entire roundup.

What owners respond to most is build quality — it sits at the top of their feedback by a wide margin, with value not far behind. Tradespeople describe it as competitive with the big-name yellow and red brands, and one used those words: “They are even with Dewalt and Milwaukee if not better.” The 1/2-inch drill and 1/4-inch hex impact driver pair covers both drilling and heavy fastening, and both fit comfortably in tight spaces thanks to the compact body.

The catch is the battery ecosystem — FLEX’s 24V line has fewer attachments and accessories than the long-established platforms, so if you want dozens of specialty tools sharing one battery, this isn’t that. One tip from experienced owners: skip the 2Ah batteries for heavy work and step up to the larger stacked lithium packs. As a two-tool starter kit, its 2.5Ah packs and 160W fast charger match anything here on runtime per charge.

Check Price on Amazon

A drill and impact driver that slide between studs and into cabinets where bigger tools won’t go.

Head length is the number that matters on a combo kit you use overhead or in tight spots. The impact driver here measures just 4.9 inches at the head — short enough to fit between wall studs or inside a cabinet where bulkier tools simply won’t reach. The drill/driver is 6.3 inches long and delivers up to 400 in-lbs of torque, giving you a strong power-to-size ratio for overhead work that doesn’t wear your arms out.

The impact driver produces up to 1,800 in-lbs of torque, which sits above the CRAFTSMAN kit’s 1,500 in-lbs and is capable of driving large screws and lag bolts into wood or metal. Two 18V 2.0Ah batteries, a charger, two belt clips, and a carrying bag round out the package. Quality is the trait owners mention most, and it comes up often — reliability lands second. Feedback also notes that Bosch tools hold up to years of hard use, with one owner putting it simply: “Can’t go wrong with Bosch.”

The charger is on the bulky side, which is normal for the class but worth knowing if drawer or garage shelf space is tight. The 18V platform also won’t accept packs from other brands, so switching ecosystems means starting fresh. If you’re already on Bosch’s 18V platform or want a 4.9-inch impact head for tight spaces, this one earns its spot.

Check Price on Amazon

Two compact brushless tools that open up a battery platform spanning hundreds of other M18 tools.

This kit’s real strength isn’t a single spec — it’s the ecosystem behind it. The 3601-20 1/2-inch drill/driver and 3650-20 1/4-inch hex impact driver both run on the M18 REDLITHIUM CP2.0 batteries that power hundreds of other Milwaukee M18 tools. One owner chose this kit specifically because it “serves a basis for expanded line of up to 300 tools using the same battery.” Buy it once, then add a circular saw, reciprocating saw, or jobsite light on the same M18 CP2.0 packs.

Compact size is the second story — a short body fits tight spots and gets into places a full-size drill won’t reach. Quality is the aspect owners mention most, by a large margin, and performance lands second. Buyers like that the light activates without the drill turning and stays on after the trigger releases. There’s also a battery test button, and customers note long runtime per charge. Both tools run brushless, which cuts friction and heat on extended jobs.

Battery life draws mixed notes — some owners find it better than competing brands, others report charging hiccups from the start (one had to run full discharge-and-charge cycles to wake the packs up). The charger also has a reputation for needing a firm push to seat a battery before the indicator lights settle. Neither is uncommon on new Milwaukee kits, and neither lessens what the M18 platform delivers over time.

Check Price on Amazon

The efficiency champion — a brushless motor tuned to squeeze up to 50% longer runtime out of each charge.

The headline number here is 50%. Makita’s brushless motor is electronically controlled to tune battery energy use, adding up to 50% longer runtime per charge — a genuine edge for anyone working through a long job without swapping batteries. Two 3.0Ah LXT packs help too, since they hold more charge than the 1.3Ah or 1.5Ah batteries on smaller kits.

On the tools themselves, the drill/driver puts out 440 in-lbs of maximum torque at 0-500 and 0-1,900 RPM, weighing just 3.6 pounds with the battery attached. The impact driver reaches 1,500 in-lbs of torque at 0-3,400 RPM and 0-3,600 IPM, at 3.3 pounds. Functionality tops the feedback from owners, followed closely by battery life. One reviewer describes the impact driver as driving screws into wet treated lumber “like butter” — right up there with heavier pro kits.

The impact driver only has one speed — you have to feather the trigger to control torque output, and buyers warn that this takes a minute to get used to, especially on softwoods and drywall. That single-speed design is a trade-off for the runtime efficiency this motor is built for. The chuck turns tight easily, and the LXT batteries are backward compatible with older Makita 3.0Ah packs.

Check Price on Amazon

The weekend-warrior kit that shows up with 1,700 in-lbs of impact torque and a brand of loyalists behind it.

That’s 1,700 in-lbs of torque on the impact driver — higher than the CRAFTSMAN kit’s 1,500 and the FLEX’s — and 400 in-lbs on the drill/driver. Ryobi’s brushless motor drives both, and the pair runs 30% more compact and 23% lighter than earlier generation tools, making it an easy pick for overhead work or tight corners. Two 1.5Ah batteries, a charger, and a bag ship in the box.

Owners put quality first in their feedback, with value and performance close behind. Durability is the quiet story — a set bought by a mason ran for 4.5 years on the job, and one long-term owner was still using their first Ryobi kit after five years, noting “they left a tool bag the most-used tool” in their rotation. The impact driver doubles as an automotive impact for tires when you pair it with an adapter, so this kit covers more than framing and cabinets.

Two things to weigh before you buy. Owners note it doesn’t come with impact driver bits — you’ll need to add those separately. And the 1.5Ah packs run leaner than the 3.0Ah or 5.0Ah options on other kits in this list, so longer jobs mean a swap. Neither is unusual for a starter kit at this level, and neither stops this from being a serious value pick.

Check Price on Amazon

The step-up DEWALT — XR-class power, a 6.37-inch drill body, and 1,825 in-lbs of fastening muscle in the impact driver.

Torque jumps to 1,825 in-lbs here, which beats the CRAFTSMAN kit’s 1,500 in-lbs and the DEWALT DCK240C2’s entry-tier impact — real headroom when you’re driving big screws, lag bolts, or automotive fasteners. The DCD800 drill body is 6.37 inches long, which the maker states is 1/2 inch shorter than the DCD791’s tool head, and its 1/2-inch metal ratcheting chuck grabs bits with high retention so they don’t slip mid-job.

Three details set the XR apart. First, an adjustable 3-position, 3-mode LED puts out up to 70 lumens and includes a spotlight mode with a 20-minute shutoff — long enough to work in a dark crawlspace without resetting the light. Second, the impact driver runs 3-speed settings for control across fastening and drilling. Third, the drill has a Precision Drive mode in speed 1 that helps prevent over-tightening screws in delicate material. Quality is the trait owners praise most, and value lands close behind. Feedback notes the batteries carry level indicators, and one owner described the build as a “sturdy build, strong motors.”

The 2Ah packs are the limiting factor on long sessions. The impact driver also arrives without a bit holder, which one owner missed from an older kit. Overall, this is the pick if XR-grade torque matters and you’ll accept a modest step down in battery endurance.

Check Price on Amazon

A hammer drill and impact driver combo backed by 5.0Ah batteries — the kit that runs all day on one charge.

If your project list runs long, start here. The drill in this M18 Fuel kit is a 1/2-inch hammer drill with a POWERSTATE brushless motor delivering 1,200 in-lbs of peak torque and up to 2,000 RPM. The companion 2753-20 impact driver hits 1,800 in-lbs of fastening torque. Two REDLITHIUM XC 5.0Ah batteries come in the box — those hold five times the charge of the 1.3Ah packs on the entry-level DEWALT kit, which is where the “runs all day on one charge” reputation comes from.

What owners point to first is battery life, with power a close second and performance third. One pro carpenter returned their Makita set after a single job and switched to this kit for its case, battery life, and 4-mode impact driver that includes a self-tapping mode. Reviewers point out the drill bored a 2.5-inch bit through a 6-inch old-growth floor plate and a 1/2-inch hole through 4140 steel plate without complaint. The set also ships complete with side handle, belt clips, bit holders, and a hard carrying case.

The weight is real — 16.2 pounds as shipped, with the impact driver being on the heavy side in hand. Owners also flag that the LEDs cast a shadow rather than lighting the work evenly, and that the case lacks bit storage. This 16.2-pound kit suits contractors driving lag bolts and boring 2.5-inch holes; for hanging shelves and assembling furniture, a 2.8-pound kit like the DEWALT DCK240C2 is easier to hold overhead.